PRECISION

Distributors and processors of flat-rolled steel, combining experience with state-of-the-art service.

CONSISTENCY

Serving the needs of NW area manufacturers and fabricators since 1956.

RELIABILITY

A regionally-focused, locally-owned company with tremendous service capacity.

FOCUS

More than a half-century of specializing in flat-rolled steel helps us help our customers.

Products

HOT ROLLED STEEL

  • Base metal low to high carbon. Semi-smooth thin adherent surface oxide. Normally dry.
    Grades: CQ, A36, 33, 36, A572-50, A656-80
    Widths: .500” through 72”
    Thickness: .059” to .500”



HOT ROLLED PICKLED AND OILED STEEL

  • Scale-free carbon steel sheet. Always oiled and very good forming characteristics.
    Grades: CQ, 33, 36, A36
    Widths: .500” through 60”
    Thickness: .059” to .500”



COLD ROLLED STEEL

  • Uniformity of properties superior to hot rolled sheet with closer dimensional tolerances and smoother, more uniform appearance.
  • Surface normally oiled and features an excellent appearance after painting.
    Grades: CQ, GR33, GR50
    Widths: .500” through 60”
    Thickness: .015” to .1345”



HOT DIPPED GALVANIZED STEEL

  • One of the most economical corrosion-resistant sheet material available.
  • Zinc coating applied by a continuous process.
    Grades: CQ
    Coating: G90
    Widths: .500” through 60”
    Thickness: .015” to .135”



ALUMINIZED COLD ROLLED STEEL

  • Carbon steel sheet coated with aluminum on both sides. Type 1 with aluminum silicon alloy.
  • Intended for heat resistant applications and where both corrosion and heat are involved.
    Coating: TI-40
    Widths:
    Thickness: .0329” to .1345”

GALVANNEALED STEEL

  • A carbon steel sheet coated with zinc on both sides by a continuous hot dip process.
  • Non-spangled mat finish suitable for painting with minimal pre-treatment.
    Grades: CQ
    Coating: A40, A60
    Widths: .500” through 48”
    Thickness: .015” to .138”



ELECTRO GALVANIZED STEEL

  • An electrolytic zinc-coated product. The coating weight is generally less than hot dipped galvanized.
  • Smooth, uniform surface that is excellent for painting with minimal amount of pre-treatment.
    Widths: .500” through 48”
    Thickness: .015” to .104”



HOT ROLLED PLATE

  • Discrete hot rolled steel plates.
    Grades: A36, A572-50
    Plate Size: Typically 96 x 240, other sizes please inquire
    Thickness: .375” to 6”



STAINLESS STEEL

  • Stainless steel in sheet and coil is widely used to manufacture products with specific applications such as high corrosion, extreme aesthetic, and food and medical uses.
    Grades: 304 and 316
    Surface Finish: 2B, #1 and #4
    Widths: 36” through 60”
    Thickness: .0235” to .500”



ALUMINUM

  • Aluminum sheets exhibit excellent formability and weld-ability as well as high strength-to-weight ratio.
    Grades: 5052-H32
    Widths: 36” through 60”
    Thickness: .040” through .500”



RED METALS AND ALLOY SHEET AND PLATE

  • Please inquire with your Sales Representative on material availability and processing capabilities.